Services
We specialise exclusively in building energy modeling and the analysis that supports code compliance and green-building certification.
Detailed dynamic simulation of envelope, glazing, HVAC, lighting, DHW and plug loads in eQUEST, IESVE, EnergyPlus and OpenStudio to predict and optimise annual energy use.
LEED v4 / v4.1 energy modeling for EAp2 & EAc2, with measure analysis to maximise points and a clear path to your target certification level.
Appendix G Performance Rating Method and prescriptive compliance, with baseline/proposed documentation ready for plan review and certification.
Energy, comfort and daylight modeling to support WELL, EDGE and BREEAM certification across international markets.
Daylight factor, spatial Daylight Autonomy (sDA), Annual Sunlight Exposure (ASE) and sun-path studies for code and certification daylighting credits.
PMV/PPD comfort analysis and CIBSE TM52 / TM59 overheating assessments — plus room-level CFD in COMSOL and OpenFOAM when zone averages aren't enough.
Explore CFD servicesManual J / ASHRAE heating & cooling load calculations and HAP system modeling for accurately sized, efficient HVAC equipment.
PV layout and yield modeling (HelioScope) and on-site renewable strategies to reach net-zero and code renewable-energy targets.
Whole-building LCA to EN 15978, embodied & whole-life carbon, and EPD development to ISO 14025 / EN 15804 — for LEED v4.1/v5, BREEAM and net-zero targets.
Explore LCA & EPD services